GSW_LOGO.gif (57327 bytes)

 A better Crankcase Vent for Saito Engines 


vent1.jpg (131378 bytes)

vent.jpg (103777 bytes)

After its drilled & tapped with the #6-32, install a "muffler pressure fitting". These fittings are available at most all hobby shops.

vent3.jpg (122053 bytes)

Connect your vent line to the fitting and you're done. I might note here that this vent system works best with the dual vent setup.

saitodualvent.jpg (182291 bytes)

This is the ultimate ventallation system for Saito Engines. It creates positive crankcase ventallation and keeps your airplane clean.


Tech Site   general_button.jpg (3111 bytes)    general_button.jpg (3111 bytes)